• Nidec
• CIM
• 1/4-20 x 1.5“ Hex (2 pcs)
• 1/4-20 x 0.625” Counter Sink Hex (3 pcs)
• Spacer: 1.25“, 0.5” OD, 0.192“ ID
• Spacer: 1.25”, 0.5“ OD, 0.250” ID (2 pcs)
• Spacer: 1.25“, 0.5” OD, 0.3125“ ID
• 1/4-20 x 1.75” Hex (2 pcs)
• 5/16“ washer (3 pcs)
• 5/16-18 x 2.25” Hex
• #10-20 x 0.25“ Hex Button Head (6 pcs)
• 5/16-18 Lock Nut
• #10-32 x 2.25” Hex
• AM-0034; 14 Tooth Gear
• AM-0032; 2mm Key (square)
• AM-2095; 5/8“ Round Bearing
• Vex Versa Wheel DT 4”
• CSCA035; Thin section bearing found at vxb.com
• 6325K86 @ Mcmaster Carr; 48 Tooth Gear
• hub; 0.25“ ID; 0.5” top OD, 1“ bottom OD
• #11-38 x 0.3125” Hex Counter Sink (6 pcs)
• AM-2986; 0.5“ Hex Flanged Bearing
• VexPro 217-3210; 30T Gear, 3/8” Hex bore
• 3/8“ Hex Bore washer, 0.5” OD, 0.0625“ thickness
• F608-2RS @ vxb.com; flanged bearing
• 688-2RS @ vxb.com; bearing (2 pcs)
• AM-0573; Flanged bearing
• AM-0030; Flanged bearing
• 94195A240 @ Mcmaster; self taping screws (6 pcs)
• VexPro 217-5829; hex flanged bearing
• 1/4-20 x 1” hex (2 pcs)
• 91259AB34 @ Mcmaster; shoulder screw
• 3/8“ Hex Aluminum; 2.07” long, 0.4475“ long, lathe cut on one side with 0.133” OD
• #12-22 x 0.5“ Hex countersink (can be replaced with 1/4-20)
• #10-32 x 0.5” button head screw
• Gates 9293-0501 @ rolaysupply.com; belt
• AndyMark CIMcoder

3d print

• both bevel gears ??? (labeled KSB)
• Spacer wheel
• Steel pulley custom
• Base pulley custom

Machining

• Intermediate Shaft
• main plate
• motor plate
• all spacers